pp melt blown filter cartridges

The basic parameters of PP melt blown filter cartridges include:

Material: The filter cartridge is made of polypropylene (PP) melt blown material.

Micron Rating: The filter cartridge has a specific micron rating, which indicates the size of particles it can effectively filter out. Common micron ratings for PP melt blown filter cartridges range from 1 to 100 microns.

Length: The length of the filter cartridge can vary depending on the specific application and requirements. Common lengths range from 5 inches to 40 inches.

Outer Diameter: The outer diameter of the filter cartridge is typically standardized to fit standard filter housings. Common outer diameters include 2.5 inches and 4.5 inches.

inner Diameter: The inner diameter of the filter cartridge is also standardized to fit standard filter housings. Common inner diameters include 1 inch and 1.5 inches.

Flow Rate: The flow rate of the filter cartridge refers to the maximum rate at which water or fluid can pass through the cartridge without causing excessive pressure drop. The flow rate is typically measured in gallons per minute (GPM) or liters per minute (LPM).

Operating Temperature: The PP melt blown filter cartridges can withstand a specific operating temperature range. Common temperature ranges for these cartridges are between 40°F (4.4°C) and 140°F (60°C).

End Cap Types: The filter cartridges have different end cap types to ensure proper sealing and fit in filter housings. Common end cap types include DOE (Double Open End) and SOE (Single Open End) with various configurations.

These parameters can vary depending on the specific manufacturer and product line, so it is important to refer to the product specifications provided by the manufacturer for accurate information.

whatsapp：8618032835827
E-Mail: sales4@incefiltration.com